ABS Commercial OEM Keypad Replacement for GS2 Micro Drives

Since the original keypad is no longer available we developed this retrofit kit.  This can be used on a surface mount only retrofit.  It will not fit on the drive because it must be connected via a cable. 
This adapter will allow the use of a VFD-E keypad to operate a GS2 VFD.  The unit will require a power down to exit programming mode. If used on the brewhouse rakes, reverse motor function is not available. Please refer to the MS300 Upgrade Kit.

This adapter is 2 7/8" wide and 3 1/8 " and a height of 5/8".  It comes complete with keypad, screws and instructions.  No programing is necessary if you are replacing a GS2 keypad.
Tools required: a small to medium Philips screwdriver.  

This Keypad has a header that is oriented 90 degrees from the original.